MIUFLY S2 PRO - Power & General Settings; Screen Saver & Brightness; Auto Power Off; Password & Defaults

12
Screen Saver
The amount of the time the camera
can be idle before deactivating the
display to conserve power.
Off, 30 sec, 1 min, 3
Mins, 5 Mins
LCD
Brightness
Screen lighting to view
High, Medium,Low
Auto Power
off
The amount of the time the camera
can be idle before powering off.
Off, 30 sec, 1 min, 3
Mins, 5 Mins
Power saving
When on, will enter power saving
mode
On, Off
LED Light
When on, indicator LED will tell the
status of the camera; When off,
camera is entering covert mode
On, Off
White Led
White Led light to offer light source
On, Off
Key Tone
When on, camera will play a tone
each time you press a button. When
off, tone is disabled.
On, Off
Motor
When on, there will be no vibration
prompts during startup, shutdown,
video recording, and recording.
On, Off
Volume
The volume of camera speaker. This
affects the loudness of video
playback, audio playback, the key
tone, record warning, and any other
sounds played by camera. This
doesn't affect the volume of the
recorded video or audio files
themselves.
0-12
Time Setup
Adjust time to real location
yyyy/mm/dd __:__
ID setting
User is able to set Device SN and
Person SN
Alphanumeric
characters
Password
If password is on, user needs to enter
password to get access to setting and
connection to PC
On, Off
Change User
Password
Password can be set or changed
Alphanumeric
characters
Default
setting
Use this to return camera to its
original settings. This does not erase
the memory.
O (Yes), X (No)
FW Name
Firmware version