To Next PageTo Next PageWhat to do if the display of my Miura Touch terminal does not turn on?
If the display of your Miura Touch terminal doesn't turn on, it could be due to a power supply issue. First, check for any power failures and ensure the main power supply is working correctly. It can also mean that a problem has occurred with the control system, in this case you should contact your dealer or MIURA sales office.
What to do if I see a 'C500-01 Stored Data ERR' alarm on my Miura Touch terminal?
If you see a 'C500-01 Stored Data ERR' alarm on your Miura Touch terminal, this indicates that the battery needs replacement. You can continue boiler operation, but it's recommended to contact your dealer or MIURA sales office. Also, remember to set the date and time again.
What to do if I see a 'F530-08 PRESS SNSR FAIL' alarm on my Miura Touch terminal?
If your Miura Touch terminal displays a 'F530-08 PRESS SNSR FAIL' alarm, it means there's an issue with the steam pressure sensor. You can continue to operate the boiler, but it's recommended to contact your dealer or MIURA sales office.
General| Brand | Miura |
|---|---|
| Model | EJ-210 |
| Category | Touch terminals |
| Language | English |
Explanation of DANGER, WARNING, and CAUTION levels and general safety instructions for operating the EJ-210.
Details on handling regulations and the required knowledge and expertise for operating the EJ-210.
Guidelines on wearing protective gear and the prohibition of unauthorized modifications to the EJ-210.
Guide to setting steam pressure, date, time, and notification times within the User Operation mode.
Guidance on what to do when the 'Caution' lamp lights yellow, including checking display details.
Details on causes and required actions for various symptoms or display content when ordering repairs.
