MIW KWP-2460 - User Manual

3 SPEED OSCILLATING WALL FAN
MODEL: KWP-2460
READ AND SAVE THESE INSTRUCTIONS
1 - Guard screw
2 - Guard ring
3 - Front guard
4 - Screw blade
5 - Fan blade
6 - Screw motor
7 - Rear guard
8 - Motor shaft
9 - Motor assembly
10 - Wall bracket
11 - Screw base.
a. Fix the wall bracket (No.10) firmly with screw base (No.11).
b. Hang motor assembly (No.9) wall bracket (No.10).
c. Fix the rear guard (No.7) on the motor assembly (No.9) with the screw of
motor (No.6).
d. Insert fan blade (No.5) to motor shaft (No.8), lock fan blade with screw
(No.4).
e. Hold the front guard (No.3) with logo in an upright position. Fix guard
ring (No.2) on rear guard. Secure the tow guards properly with guard
screw (no.1) to avoid front guar
d from falling down.
Watts (W) Amps (A)
Volts
Low Low
107
99
1.00
0.42
Medium Medium
120
114
1.13
0.48
High High
152
146
1.50
0.63
240V / 50Hz
110V / 50Hz
SPECIFICATION

Summary

Assembly Method

Operating Instructions

Adjust Airflow Direction

Tilt the fan head to the desired angle by loosening and tightening the position screw and knob.

Oscillation Control

Press the knob to make the fan oscillate; pull it up to stop oscillation.

Speed Control

Rotate the switch to 0, 1, 2, or 3 for OFF, LOW, MEDIUM, and HIGH speeds.

MIW KWP-2460 Specifications

General

Model	KWP-2460
Category	Fan
Brand	MIW
Frequency	50Hz
Speed Settings	3
Voltage	220V
Blade Diameter	40 cm