Need help?Do you have a question about the MiX Telematics FM 3617i and is the answer not in the manual?
Covers installer requirements, tools, workplace safety, and ESD precautions before installation.
Details safety during installation, component positioning, and wiring practices.
Refers to safety requirements specified in the Safety section for installation.
Lists the sequence of steps for performing the installation, noting software tools required.
Details CAN wire designation, colour coding, length limits, and connection procedures.
Explains the critical jumper settings for CAN communication modes and termination.
Provides general rules and considerations for setting CAN jumpers correctly to avoid issues.
Identifies and illustrates the various connectors on the harnesses and their pin numbering.
Details the connections for the Main harness wires, including pin, colour, function, and application.
Explains default and custom settings for calibrating engine speed (RPM) signals.
Details default and custom settings for calibrating vehicle speed signals.
Outlines the procedures for testing the installation, including test drives and data extraction.
General| Category | Automobile Accessories |
|---|---|
| Manufacturer | MiX Telematics |
| Model | FM 3617i |
| GPS | Yes |
| Operating Temperature | -20°C to +70°C |
| Connectivity | Bluetooth |
| Certifications | CE, FCC |
To Next Page
