mixars QUATTRO - Audio Routing; Serato Mode Signal Flow; Non-Serato Mode Signal Flow

over 9999ms, “a.bs” format will be used
in normal display. E.g. “16.0s” for
16000ms)
Pitch
Non BPM synced. Pitch range from -50%
to 100%. “PITCH” is shown as title when
adjusting this parameter.
Fixed 100% Wet
Loop Roll
Beat range: 1/16 to 16/1
Time Range: 10ms to 4000ms
Fixed 100% Wet
Reverse Roll
Beat range: 1/16 to 16/1
Time Range: 10ms to 4000ms
Fixed 100% Wet
Noise
Beat range: 1/4 to 64/1
Time Range: 10ms to 32000ms (when
over 9999ms, “a.bs” format will be used
in normal display. E.g. “32.0s” for
32000ms)
Depth (Dry/Wet) 0-100%
Bit Crusher
Non BPM synced. Quality parameter
range from -100% to 100%. “QUALITY” is
shown on title when adjusting this
parameter
Depth (Dry/Wet) 0-100%
Gate
Non BPM synced. Threshold adjustment of
steps:
From 0% to 100%
Depth (Dry/Wet) 0-100%
Tape Delay
Non BPM synced. Tone pitch of the delay
signal form -100% to 100%.
Depth (Dry/Wet) 0-100%
Vinyl Brake
Non BPM synced. Break time from 10ms
to 4000ms.
Manual control of the
Break FX.
Turn clockwise to engage
and shorten the break
time.
Turn anti-clockwise to re-
engage the break FX with
a longer break time.
Send/return
NA. Display “---“ for the time/ beat field
Depth (Dry/Wet) 0-100%
EN 7