Mixergy M0008 - User Manual

Installation and servicing instructions
For stainless steel hot water cylinders
Failure to install and maintain this system in accordance with
these instructions will invalidate the manufacturer’s warranty.
Please leave with householder
Mixergy Ltd
2 Canal View
Wharf Farm
Cassington
Oxfordshire
OX29 4DB
V8 28/02/19
®

Summary

Cylinder Details

Technical Data

Lists key technical parameters such as pressure, temperature, and power ratings.

Schematic: Direct

Schematic: Indirect

Installation: General Guidelines

Cylinder Positioning and Space Requirements

Guidance on placing the cylinder and necessary clearances for installation and maintenance.

Pipework, Valves, and Safety Devices

Details on connecting pipework, installing valves, and ensuring safety device functionality.

Installation: Electrical

External Wiring and Supply Connections

Guidance on connecting the cylinder's external supply and sense cables.

Indirect System Wiring and Controls

Details for wiring indirect systems, zone valves, external controllers, and PV diverters.

Installation: Connectivity

Powerline Adapter Setup

Discharge Pipework

Safety Device Discharge and Tundish

Discharge Pipe D2 Sizing, Routing, and Termination

Commissioning

System Filling, Safety Checks, and Eco Mode

Internet Connectivity and Pairing Procedure

Commissioning Checklist

Fitter and System Details

Primary Settings and Final Checks

Problem Solving

Water Discharge and Overheating

Electrical, Connectivity, and Valve Faults

Expansion Vessel and Immersion Heater Issues

Draining and Flushing the Cylinder

Servicing and Maintenance

Annual Service Checks

Replacement Parts

Mixergy M0008 Specifications

General

Model	M0008
Power Rating	3 kW
Voltage	230 V
Frequency	50 Hz
Energy Efficiency Rating	B
ErP rating	B
Thermostat	Electronic
Heating Element	Immersion Heater
Warranty	2 years