LET’S STORE YOUR VIDEOS & IMAGES
Fully insert the Micro SD card (not included) into the Micro SD slot ensuring
the card is correctly orientated. (If it does not fully insert please turn the SD
card over and try again.) Do not use force to insert the SD card. Please choose
known branded SD cards as unbranded cards cannot be guaranteed to work
correctly with the camera.
LET’S INSTALL THE BATTERY
Using a fingernail press on the battery door latch to open the door .
Insert the battery while observing the + / - symbols and arrows inside the
battery door to position the battery correctly. Close the battery door. To remove
the battery open the door latch and take the battery out.
LET’S STAY CHARGED
Charge the camera using the Micro USB cable supplied. Attach the cable to
a suitable USB wall charger, power outlet or computer. It is recommended to
use a wall charger for optimum charging speed. It is not necessary to turn on
the camera whilst charging however, the camera may be used and recordings
made whilst it is charging.
1312
12
3
To Next Page
Loading...