Mizuho osi Hana 6875 User Manual (English)

Other manuals for Mizuho osi Hana 6875

Questions and Answers:

M
mfowlerAug 2, 2025
What to do if Mizuho osi Hana 6875 Medical Equipment table is dead?
- O
  olivia54Aug 2, 2025
  If your Mizuho OSI Medical Equipment table is unresponsive, begin by checking the power cord connection to both the AC receptacle and the Motion Control Box. Ensure the power switch is on and illuminated. If it's not lit, the table might be running on battery. Check if the circuit breaker on the Motion Control Box base has tripped; if so, reset it by toggling the power switch off and on. Also, verify the component circuit breakers at the Motion Control Box base haven't tripped; press the buttons to reset them, after identifying the overload source.
A
andrea99Aug 7, 2025
What to do if Mizuho osi Hana 6875 tabletop doesn't move?
- A
  aaronnealAug 7, 2025
  If the tabletop of your Mizuho OSI Medical Equipment doesn't move when using the Height, Lateral Tilt, or Trendelenburg buttons, first, ensure the power cord is correctly plugged into the AC receptacle and the Motion Control Box. Verify the power switch is illuminated. Check the Hana® Hand Pendant connection to its receptacle and confirm the control buttons light up green. Press and hold the relevant button to observe tabletop movement. If it fails, try the Control Pad buttons on the Motion Control Box. If the tabletop moves with the control box, the Hana® Hand Pendant may need replacement. If operating on battery, ensure it is adequately charged.
K
Kevin CallahanAug 12, 2025
Why is the battery status LED red on my Mizuho osi Medical Equipment?
- R
  richard32Aug 12, 2025
  A red battery status LED on your Mizuho OSI Medical Equipment indicates that the battery requires charging. To resolve this, charge the batteries for a minimum of three hours by plugging the power cord into a hospital-grade AC outlet with the power switch toggled to the On position.
S
sarahthomasAug 17, 2025
How to fix a loose leg spar on Mizuho osi Medical Equipment?
- N
  nicholas59Aug 17, 2025
  If the leg spar on your Mizuho OSI Medical Equipment is loose, start by checking if the Spar Lock Handle is stripped. If it is, the handle needs to be replaced.

Mizuho osi Hana 6875 Specifications

General

Brand	Mizuho osi
Model	Hana 6875
Category	Medical Equipment
Language	English

Mizuho osi Hana 6875 Maintenance & Repair Manual

Table of Contents

Other manuals for Mizuho osi Hana 6875

Questions and Answers:

Mizuho osi Hana 6875 Specifications