To Next PageTo Next Page
Need help?Do you have a question about the MJ LED LIGHTNING MJ-1025 and is the answer not in the manual?
Power| voltage | 100 - 240 V |
|---|---|
| power consumption at 120V | 26 W |
| power consumption at 230V | 27 W |
Lighting Specifications| LED power | 12 W |
|---|---|
| beam angle | 13 degrees |
| colors | 7 + White |
Weight and Dimensions| length | 6.25 in / 159 mm |
|---|---|
| width | 5.75 in / 147 mm |
| height | 10.5 in / 265 mm |
| weight | 7 lbs / 3 kg |
Identifies the product as Inno Pocket Spot Pearl MJ-1025 and presents an introductory statement.
Highlights crucial information regarding safe installation, operation, and potential product improvements.
Covers transportation checks, indoor/dry use, mounting, ventilation, beam safety, electrical connections, and power cord handling.
Advises on optical system cleaning, lens handling, safety fixing, lens replacement, and user servicing restrictions.
Requirements for structural support, secondary safety attachments, and professional checks for overhead mounting.
Details on mounting positions, clearance from flammables, and suitable operating temperature range.
Explains auto-sensing voltage, DMX-512 protocol, and DMX linking principles.
Covers DMX linking, cable path, and fixture order in a DMX line.
Details DMX addressing within a line and specifications for DMX data cables.
Explains XLR pinouts for DMX and the importance of line termination for signal integrity.
Covers 3-pin to 5-pin XLR conversion, DMX address, channel mode, and show mode selection.
Details on selecting dimmer curves, activating sound mode, and adjusting sound sensitivity.
Covers slave mode, pan/tilt inversion, LED display control, display orientation, and self-test.
Explains temperature display, fixture reset, and detailed DMX address setting procedure.
Detailed steps for selecting DMX channel mode, show modes, and dimmer curves.
Instructions for Master/Slave setup, sound active mode, sensitivity, and pan inversion.
Covers tilt inversion, LED display timeout, display flip, self-test, temperature, and reset functions.
Allows adjustment of original pan, tilt, gobo, and color wheel positions.
Guide on using a DMX controller, DMX channel modes, setup procedures, and cable considerations.
Describes how units operate in sound active mode, either individually or linked.
Details linking up to 16 units, DMX cable connections, and setting master/slave configurations.
Overview and mapping of functions controllable via the UC-IR infrared remote.
Explains remote control functions like stand-by, gobo, dimmer, strobe, color, and sound/show.
Detailed table for 9CH and 11CH DMX modes, showing functions, values, and settings.
Details DMX controls for gobo shakes, scrolls, shutter effects, dimmer, and function assignments.
Visual representation of light output (LUX) at varying distances.
Provides timing data (Trise, Tdown) for different dimmer curve effects.
Instructions on locating and replacing the unit's fuse.
Guidance on cleaning external casing, cooling vents, and internal/external optics.
Addresses issues like no light output and unit not responding to sound.
Details model, electrical, physical, DMX, color, gobo, sound, and warranty information.
