MJM 193 User Manual

MJM International Corporation 1-800-270-6199 Fax: (956) 781-5552
www.mjminternational.com
REV. B Date: 02-02-09 Page 1 of 2
MJM INTERNATIONAL CORPORATION
ASSEMBLY INSTRUCTIONS FOR
RECLINING SHOWER CHAIRS 193, 194, 195, 196
 4 CASTERS W/ LEGS STEMS
(2 BRAKE & 2 NON-BRAKE)
 1 SLIDING FOOTREST SUPPORT
 2 ARMREST
 ELEVATED LEGREST/WITH CUSHION.
 RECLINING BACKREST/LUMBAR SUPPORT
CUSHION/SLING SUPPORT.
 PUSH PULL HANDLE
 16 (SIXTEEN) ½’’ SCREWS.
 4 (FOUR) 1’’ SCREWS.
 PLACE 196 RECLINING SHOWER CHAIR ON A FLAT SURFACE UPSIDE
DOWN TO INSERT (4) CASTERS.
 SECURE CASTERS USING ½’’ RETAINING SCREWS.
(USE PREDRILLED HOLES AS REFERENCE).
EXAMPLE - 196 COMPONENTS
IDENTIFY ALL COMPONENTS TO START ASSEMBLY
STEP 2
NOTE: A PHILLIPS SCREWDRIVER OR A CORDLESS
HAND DRILL IS REQUIRED TO TIGHTEN / SECURE
ALL SCREWS.
NOTE: PLEASE MATCH EACH COLOR-CODED DOT
ACCORDINGLY.
STEP 4
 REMOVE (2) 1’’ RETAINING SCREWS FROM ELEVATED LEGREST
SUPPORT AND SEPARATE FROM PVC PIPE.
 CENTER AND INSERT LEGREST SUPPORT INTO SWIVEL FITTINGS.
 SECURE ELEVATED LEGREST SUPPORT USING 1’’ RETAINING
SCREWS.
(USE PREDRILLED HOLES AS REFERENCE).
STEP 3
 PREMOVE ½’’ RETAINING SCREWS, (4) FROM 4-WAY FITTINGS TO
INSTALL SLIDING FOOTREST.
 CENTER AND INSERT SLIDING FOOTREST.
 SECURE SLIDING FOOTREST USING ½’’ RETAINING SCREWS.
(USE PREDRILLED HOLES AS REFERENCE).
196 RECLINING SHOWER CHAIR
FACILITATE SHOWERING & TOILETING
SHOWN WITH
OPTIONAL COMMODE PAIL

MJM 193 Specifications

General

Brand	MJM
Model	193
Category	Mobility Aid
Language	English

Summary

Identify Components for Assembly

Step 2: Install Casters

Step 3: Install Sliding Footrest

Step 5: Install Armrests

Step 6: Install Reclining Backrest

Step 7: Install Push Pull Handle

Step 8: Attach Cushions and Supports