- 4 -
Cooling requirements are considerably relaxed when mounting inside the passenger
compartment since the driver will not often allow temperatures to reach a critical
point. Floor mounting under the seat is usually satisfactory as long as there is least 1inch
(2Cm) above the Amplifier’s fins for ventilation.
a.Select a suitable location that is convenient for mounting, is accessible for wiring,
and has ample room for air circulation and cooling.
b.Use the amplifier as a template to mark the mounting holes. Remove the Amplifier
and drill 6 holes. USE EXTREME CAUTION, INSPECT UNDERNEATH SURFACE BEFORE
DRILLNG.
C.Secure the Amplifier using the screws provided.
To Next Page
Loading...
