EasyManua.ls Logo

MKN 2023104-00ABBE-B - User Manual

MKN 2023104-00ABBE-B
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operating Manual
Induction hob
CERAN
SizeVersion
1-zone hobInduction hob
2-zone hob
4-zone hob
Open out the cover page to see the
controls and displays.
Operating Manual
2023104-00ABBE-B / en-GB
Translation of the original operating instructions 2023104-00ABDE-B / 14.12.2010 / TANNER/TD

Table of Contents

Questions and Answers

  • K
    Kimberly LeeJul 31, 2025
    Why doesn't the control lamp go on for one second when I switch on my MKN 2023104-00ABBE-B?
    • K
      kristenwilliamsJul 31, 2025
      If the control lamp on your MKN Hob doesn't illuminate for one second upon switching on, there could be several reasons: * A possible interruption in the power supply. Check the power supply, fuses, and residual current protection switch. * A defective unit switch or contactor. In this case, contact customer service and do not use the cooking zone. * A defective induction generator or control lamp.
  • B
    blackburnphillipAug 15, 2025
    What to do if the control lamp stays on even if there is no cookware on the cooking zone of my MKN 2023104-00ABBE-B?
    • E
      Eduardo ClarkeAug 15, 2025
      If the control lamp on your MKN Hob remains illuminated even when there is no cookware on the cooking zone, it indicates a fault in the pot recognition function or a faulty control lamp. To resolve this, switch off the unit and contact customer service.

Summary

Warnings and Liability Information

Warnings

Explains how warnings are indicated and where their meanings are detailed.

Signs and Symbols Guide

General Safety Information

Target Group

Hot Surfaces Safety

Provides safety measures for hot surfaces to prevent burns.

Electrical Safety

Outlines precautions to avoid electric shock hazards.

Fire Prevention

Lists safety measures to prevent fires caused by overheating cookware.

Specific Safety Risks

Damaged Ceran Hob Risks

Warns about glass splinters from a damaged hob and necessary actions.

Magnetic Field Risks

Incorrect Cleaning Damage

Improper Use Hazards

Equipment Damage from Improper Use

Lists actions that constitute improper use and can damage the unit.

Operating the Induction Hob

Initial Use Procedures

Handling Tips

Control Lamp Displays

End of Operation and Breaks

Managing Breaks and End of Operation

Cleaning Procedures

General Cleaning Guidelines

Cleaning the Ceran Hob

Exchanging the Air Filter

Replacing Air Filter Underneath Unit

Exchanging Tray Insert Air Filter

Faults and Troubleshooting

Explanation of Coded Flashing

Explains the coded flashing signals used by the control lamp to indicate malfunctions.

Causes of Faults and Troubleshooting

Lists common faults, their possible causes, and recommended remedies.

Further Faults and Troubleshooting

Troubleshooting Table (Continued)

Continues listing common faults, their possible causes, and recommended remedies.

Fault Scenarios

Faults and Possible Causes

Details specific fault conditions, their potential causes, and suggested remedies.

Fault Conditions

Faults and Possible Causes (Continued)

Details specific fault conditions, their potential causes, and suggested remedies.

MKN 2023104-00ABBE-B Specifications

General IconGeneral
BrandMKN
Model2023104-00ABBE-B
CategoryHob
LanguageEnglish