EasyManua.ls Logo

mLogic mTape Thunderbolt LTO 6 User Manual

mLogic mTape Thunderbolt LTO 6
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
mTape
Thunderbolt
TM
LTO
Question and Answer IconNeed help?

Do you have a question about the mLogic mTape Thunderbolt LTO 6 and is the answer not in the manual?

mLogic mTape Thunderbolt LTO 6 Specifications

General IconGeneral
InterfaceThunderbolt
Storage TypeTape
Tape TechnologyLTO
Maximum Data Transfer Rate (Native)160 MB/s
Maximum Data Transfer Rate (Compressed)400 MB/s
Native Capacity2.5 TB
Compressed Capacity6.25 TB
Compression Ratio2.5:1
Form FactorExternal
Drive MechanismHalf-Height
CategoryStorage
LTO GenerationLTO 6
Power Supply100-240V AC, 50-60Hz
Weight9 lbs

Summary

mTape Features Overview

Disabling Sleep Mode

Connecting mTape to Your Computer

Powering On mTape

Verify System Recognition

LTO Cartridge Operations

Loading the LTO Cartridge

Insert cartridge with arrow up when Green Ready Light is steady. Apply gentle pressure.

Unloading the LTO Cartridge

Use backup application. Drive rewinds and unloads. Green light flashes during unload.

Cleaning the LTO Tape Drive

Appendix B: Status Lights and Error Codes

Appendix C: Error Codes and Messages

Error Code 1: Temperature Problem

Exceeded recommended operating temperature. Check fan and blockages.

Error Code 2: Power Problem

External power outside voltage limits. Check connector and cycle power.

Error Code 3: Firmware Problem

Tape drive determined a firmware error occurred.

Error Code 4: Firmware/Hardware Failure

Firmware or tape drive hardware failure occurred.

Error Code 5: Tape Path/Read-Write Error

Drive determined tape path or read/write error. Prevent damage, cycle power.

Error Code 6: Drive or Media Error

Error occurred, cannot isolate to hardware or media. Check media type support.

Error Code 7: Media Error

Error due to faulty or invalid tape cartridge. Check media type support.

Error Code 8: Interface Problem

Failure occurred in tape drive hardware or host bus.