MMD Equipment NGK-2900H

Need help?

Do you have a question about the MMD Equipment NGK-2900H and is the answer not in the manual?

Summary

Safety Precautions for NAC Generators

NAC Generator Specifications

Regular Maintenance Schedule

Scheduled maintenance tasks for NAC generators based on usage intervals.

NAC Generator Pre-Operation Checks

Inspect Overall Generator Condition

Visual inspection of the generator for damage, leaks, and debris.

Check Engine Oil Level and Condition

Procedure for checking engine oil level and condition before operation.

Inspect Air Cleaner Element

Guidance on inspecting and cleaning the engine's air cleaner.

Check Engine Fuel Level

Procedure for checking and refueling the engine's fuel tank.

NAC Generator Starting Procedures

Recoil Start Model Starting

Step-by-step instructions for starting generators with recoil pull start.

Electric Start Model Starting

Step-by-step instructions for starting generators with electric start.

Using AC Power from NAC Generator

Single Voltage (120 V) Operation

How to connect and use appliances with single voltage output.

Dual Voltage (120 V;240 V) Operation

How to connect and use appliances with dual voltage output.

NAC Generator Stopping Procedures

GFCI Receptacle Functionality

Explanation of Ground Fault Circuit Interrupter (GFCI) operation.

Testing GFCI Receptacles

Procedure for testing the GFCI receptacles on the generator.

Understanding Circuit Breakers

Information on the 'NO-FUSE' circuit breakers and their function.

Troubleshooting Circuit Breaker Trips

Idle Control System Operation

How the idle control system affects engine speed and fuel economy.

Oil Sensor Functionality

Explanation of the oil sensor's role in engine protection.

Understanding Wattage Requirements

Information on appliance starting and running wattage needs.

NAC Generator Extension Cord Usage

Recommended Special Tools for Servicing

Engine Troubleshooting

Engine Will Not Start Diagnosis

Troubleshooting steps for an engine that fails to start.

Generator Troubleshooting: Voltage Issues

Diagnosing Low or No Voltage

Procedure for identifying and resolving low or no voltage problems.

General Generator Troubleshooting Steps

Inspect Overall Condition

Checking the generator's physical condition for maintenance issues.

Starting Generator for Testing

Steps for safely starting the generator to perform tests.

Begin Generator Testing

Initial steps in testing generator performance and output.

Component Testing: Condensers, Stator, Rotor

Idle Control System Troubleshooting

Engine Not Idling Down

Troubleshooting steps when the engine fails to idle down.

Engine Speed Not Increasing

Troubleshooting steps when engine speed does not increase for load.

Full Power Switch and Circuit Breaker Tests

Circuit Breaker Continuity Testing

Procedure for testing circuit breaker continuity in ON/OFF states.

NAC Generator Wiring Diagrams

NGK-2900 H Wiring Diagram

Electrical schematic for the NGK-2900H generator model.

NGK-4300 H Wiring Diagram

Electrical schematic for the NGK-4300H generator model.

NGK-6000 H Wiring Diagram

Electrical schematic for the NGK-6000H generator model.

NGK-7000 H Wiring Diagram

Electrical schematic for the NGK-7000H generator model.

NGK-6000 HE Wiring Diagram

Electrical schematic for the NGK-6000HE generator model.

NDK-4100 YE Wiring Diagram

Electrical schematic for the NDK-4100YE generator model.

NDK-6000 YE Wiring Diagram

Electrical schematic for the NDK-6000YE generator model.

NGK-7000 HE Wiring Diagram

Electrical schematic for the NGK-7000HE generator model.

Generator Bolt Torque Values