Panel Heater - English manual 5
EN
PARTS & INSTALLATION
Product features
1. Elegant black glass panel.
2. High-quality aluminum heating element: quick heating with higher
energy savings.
3. Touch screen control and remote control.
4. Timer from 1 to 24 hours to turn the convector heater on or off at the
desired time.
5. Digital display with automatic room temperature display.
6. For wall mounting or free standing with the tripod.
Installation (While use on the fl oor as a portable appliance)
Please attach the feet on the heater’s housing, and fi xing them with
supplied ST12x4mm(8pcs) screws.
Wall mounting (While use the heater as a fi xed appliance)
Please note that the product must be installed at least 15 cm from the
fl oor and 50 cm from the ceiling.
- For wall mounting study scheme.
1. Uninstall the bracket from the body, see the image1
2. Drill the holes at each side on the wall, then insert the plastic
expanded plugs within, Fix the bracket in the wall with a screw, see the
image 2
3. Fit the heater into a suitable position ensuing that the holes align with
the bracket. See image 3.
4. Tight the screw on the top of the bracket to catch steadily.
To Next Page
Loading...