CAMERA OPERTATION
Power ON/OFF
Use the Power ON/OFF sliding switch to turn ON/OFF the unit.
Channel Selection
There are 2 channels for selection in order to avoid interference from other signal
sources.
Press the channel switching button at the front of the camera.
A/V Input
This feature allows the user to have an optional analog A/V (Audio-Video) input to
the Camera unit and transmit this A/V signal to the Monitor unit when the Voice
Activation option is selected.
The A/V Input jack is located on the left side of the Camera unit. Use the AV cord to
connect the source of an AV signal (e.g. DVD) to the Camera unit.
Voice Activation
To Activate: Select the VOX setting on the Voice Activation switch on the left side
of the Camera unit.
When the sound level within the area surrounding the unit reaches a preset level, the
Camera will begin transmitting the image and sound to the Monitor.
NOTE: The LCD on the Monitor unit will be automatically switched off if no signal
is received from the Camera
To Deactivate: Select the CAMERA setting or AV setting on the Voice Activation
switch.
When set to CAMERA, it will only transmit the signal generated but the Camera
itself.
9
To Next Page
Loading...