User Manual
PACKAGE CONTENTS
Cube speaker system
USB Charge Cable
User’s Guide
CHARGING CUBE SPEAKER
Charge Cube with the included USB charge cable. Plug the micro end into the socket
(5V IN) on the bottom of the speaker and the other end into a power USB port like on a
computer. You may use any USB AC adapter that is available to charge your Cube
speaker.
PLAYING MUSIC VIA BLUETOOTH MODE
1. Make sure the Cube Speaker is fully charged.
2. Turn Cube speaker on by pressing the power button at the bottom of the speaker. A
green led will illuminate and blue led will beging flashing.
3. Follow the instructions for pairing that came with your Bluetooth enabled device. You
may have to go into your settings and turn Bluetooth ON. Make sure your device is
discoverable or in search mode.
4. Your device should discover “Cube”. Select this profile. Once connected, the blue
led will blink slowly.
5. You are now connected and play your audio content wirelessly!
LED FEATURE
With the built-in Led panels, Cube speaker can provide light show or ilumination needs if
necessary.
1. To turn on the Led, locate the led button on the bottom of the speaker, press once to
turn it on
2. Cycle through different mode by continue pressing the Led button on the speaker.
3. The music flash mode will only work if the speaker is paired and music is playing.
To Next Page
Need help?
General
