MobiCam DXR Touch - User Manual

TABLE OF CONTENTS
!
Introduction 1
Radio Interferece Parameters 1
Package Contents 2
Monitor/Receiver 2
Camera/Transmitter 3
To Star t
Charging/Powering On 4
Locking the Screen 4
Set to Another Language 4
Pairing Camera and Monitor 5
Main Menu 6
Touch Navigation
Volume/Display 7
Lullabys 7
Night Light 7
Record 8
Play 9
Quad and Channel View 10
VOX (Voice Activation) 10
Setting
s
Monitor Settings 11-14
Camera Settings 15
Individual Channel & Convenience Icons 16
Webcam Use • Data/File Transfers 17
Audio/Video Out 18
Troubleshooting 18
Factory Default Settings 19
Battery Replacement 20
Product Safety 20
Proper Disposal 21
Limited Warranty 21
Addendum: Focusing Camera Lens 21
About Mobi® / Contact Mobi® 22
INTRODUCTION
!
Congratulations on the purchase of this MobiCam® DXR Touch Monitoring
System, which incorporates the latest advanced technology. To fully maximi-
ze and benefit from this product’s avanced features we highly recommend
you review these instructions. This 2.4 GHz Digital monitor enables you to
transmit picture and sound signals cordlessly, which is ideal for many situa-
tions suchs as monitoring a baby, young children or the elderly, or used as
office or warehouse monitoring system.
!
IMPORTANT: Use ONLY a fingertip or other NON-SHARP object to select touch screen
options. Using sharp objects can damage the screen and void the warranty.
!
!
RADIO INTERFERENCE PARAMETERS
!
FCC Statement
!
15.19: This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful inter-
ference and (2) This device must accept any interference received, including
interference that may cause undesired operation.
15.21: Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the equipment.
!
FCC Radiation Exposure Statement
!
This equipment has been tested and complies with Federal Communications
Commission radiation exposure limits as set forth for uncontrolled environ-
ments. This equipment should be installed and operated with a minimum
distance of 20cm between the radiator and your body. This Camera must not
be co-located or operating in conjunction with any other antenna or Camera.
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna must not be co-lo-
cated or operating in conjunction with any other antenna or Camera. This de-
vice has been tested for compliance with FCC RF Exposure (SAR) limits in the
typical laptop computer configuration and this device can be used in desktop
or laptop computers via USB slots. This device and its antenna must not be co-
located or operated in conjunction with any other antenna or Camera.
!
IC Statement
!
Operation of this device is subject to the following two conditions: 1. This
device may not cause interference, and 2. This device must accept any inter-
ference, including interference that may cause undesired operation of the
device.
!
!
!
1

Summary

Introduction

Radio Interference Parameters

FCC Statement

Device compliance with FCC rules, subject to two conditions regarding interference.

FCC Radiation Exposure Statement

Equipment tested and compliant with FCC RF radiation exposure limits for uncontrolled environments.

IC Statement

Device operation subject to two conditions: no interference and acceptance of received interference.

Package Contents

To Start

Pairing

Instructions for wirelessly linking the monitor and camera for initial setup.

Locking the Screen

How to disable the touch-screen function by sliding the lock screen button.

To Set to Another Language

Steps to change the monitor display language from English to other options.

Main Menu Functions

Volume;Display Settings

Adjust monitor volume, screen contrast, and screen brightness.

Lullaby Selection

Select camera, lullaby choice, and lullaby volume.

Night Light Control

Turn the night light on or off for the selected camera.

Record and Photo Options

Options to take photos, record video, and manage the SD card.

Playback Recorded Media

Access recorded video and photo files.

Quad and Channel View

View single camera, quad view, or auto scan view of paired cameras.

VOX (Voice Activation)

Configure voice activation settings, including sensitivity and auto-record.

System Settings

Access monitor and camera settings, system preferences, and firmware information.

Touch Navigation

Record and Media Management

Take photos, record video, format SD card, view SD info, or delete files.

Playback Recorded Files

Playback recorded video and picture files, and manage recorded data.

Camera Views and Settings

Quad and Channel Camera Views

View single camera, quad view, or auto scan paired cameras.

Voice Activated Monitoring (VOX)

Configure voice activation sensitivity and sound-activated recording.

Monitor Settings Configuration

Access monitor settings like Date/Time, Time Alarm, and Auto Switch Time.

Advanced Monitor Settings

TV Output Format

Choose between PAL or NTSC video format for external display.

Recording Schedule Settings

Set start and end times for recording schedules.

Zoom, Pan, and Tilt Controls

Use icons to zoom, pan, and tilt the camera view.

Video Off Timeout Setting

Set the time limit for automatic video timeout (screen turn off).

USB Output Configuration

Configure monitor for charging, PC webcam, or data transfer.

Monitor and Camera Settings Details

SD Card Update Procedure

Procedure for updating system firmware using an SD card.

Language Selection

Choose the monitor display language from six available options.

Factory Default Reset

Option to reset all settings to their original factory defaults.

About and Version Information

View product name, manufacturer, and firmware version.

Camera Temperature and Alarm Settings

Set temperature range, alarm thresholds, and alarm time.

Camera Transmit Power and Volume

Adjust camera speaker volume and transmit range power.

Individual Channel Icons

Channel Number and VOX Level

View current camera number or VOX level, and adjust VOX sensitivity.

Lullaby Status and Control

View lullaby status, change lullaby selection, or turn off lullabies.

Zoom, Pan, and Tilt Camera

Add zoom/pan/tilt controls to manipulate the camera image.

Convenience Icons

Instantly adjust volume, access playback, or record video.

Webcam and Data Transfer

Webcam Use on PC

Use the monitor as a wireless webcam on a PC for video calls.

Data File Transfers to PC

Transfer photo and video files from the monitor to a PC via USB.

Audio;Video Output and Troubleshooting

Audio;Video Output Connection

Connect the monitor to a TV or other AV device for audio/video output.

Troubleshooting Common Issues

Solutions for common problems like monitor not turning on or no picture.

Factory Default Settings

Battery Replacement and Product Safety

Monitor and Camera Battery Details

Information on the included monitor battery and optional camera battery.

Product Safety Warnings

Important safety precautions for using the monitor and camera.

Disposal, Warranty, and Camera Focus

Proper Product Disposal Guidelines

Instructions for disposing of the product in accordance with regulations.

Limited Warranty Information

Details of the 90-day limited warranty for material and workmanship.

Camera Focus Adjustment

Instructions for adjusting the camera lens for optimal focus.

MobiCam DXR Touch Specifications

General

Brand	MobiCam
Model	DXR Touch
Category	Baby Monitor
Language	English