D60 Using the wine refrigerator
7
Note
You can switch the temperature display between Celsius and
Fahrenheit. To do this, press the TEMP + and TEMP - buttons
simultaneously for three seconds.
6 Using the wine refrigerator
Before you switch on your new wine refrigerator for the first time,
you should clean it inside and outside with a damp cloth for
hygienic reasons (please also refer to the the “Cleaning and
maintenance” chapter on page 8).
6.1 Energy saving tips
z Select a well-ventilated location for the device.
z Do not open the wine refrigerator more often than necessary.
z Do not leave the door open for longer than necessary.
6.2 Connecting the wine refrigerator
Danger of fatal injuries!
Never handle plugs and switches if you have wet hands.
➤ Before you start up the device for the first time, verify that the operating
voltage matches the mains voltage (see type plate).
➤ Plug the mains cable into the electrical power connection (1 1, page 3)
and then to a 100-240-V mains outlet.
6.3 Using the wine refrigerator
Food may only be stored in its original packaging or in suitable
containers.
➤ Switch the wine refrigerator on by pressing the “POWER” button
(2 1, page 3).
✓ The display switches on and shows the current cooling temperature.
➤ Switch the wine refrigerator off by pressing the “POWER” button
(2 1, page 3).
✓ The display switches off.
_D60.book Seite 7 Freitag, 22. Oktober 2010 5:06 17
To Next Page
Loading...
Need help?
General