Mobius airo2 - User Manual

...............................................................................................................................................................................................................................................
Note: This guide does not replace the user manuals.Page 1-16
POWER ON AIRO
• Insert the key and switch on the system by rotating
the key to the
On position d.
•Press the Start a button.
The yellow indicator light s illuminates.
REMOVE TABLE TOP
• Ensure the table top is removed.
TRANSPORT
• Select Transport from the Choose Mode screen
on the pendant.
• Alternatively, select
Transport on the pendant by
pressing
Menu a > Transport .
LATCH AIRO
• Ensure the gantry is at the end of the rail, away from
the table column.
• Rotate the gantry and align it with the base.
Ensure the latch is locked.
• Push the gantry towards the table column until it also
latches with the base.
NOTE: Ensure that the gantry does not come into
contact with the table column during alignment.
a
Transport
as d
...............................................................................................................................................................................................................................................
Hardware: Airo
MOVE, PARK AND STORE AIRO

Mobius airo2 Specifications