1
2
Kids Rocking Llama
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert the ends of the legs into the 2 x cross bars (D) holes as shown.
If the holes on the cross bar (D) are not lining up, place one leg in the
hole on the cross bar (D) and then apply pressure to get the other leg
to match up with the second hole on the cross bar (D).
Attach 2 x cross bars (D) to 2 x rockers (E) and secure with 8 x screws
(A). Tighten with a screwdriver.
D
D
E
E
A
A
D
A A
A A
A A