Mocka Rayne - Page 8

11
12
Unbutton the cover at the sides (fig. a) and pull up to remove it (fig. b). WARNING: Always use the restraint system, and adjust to fit
snugly.
Please remove the white stopper from the leg divider (fig_a), then insert
the T bar into the leg divider (fig_b), Finally, use a screwdriver to tighten
the screws to secure the T bar (fig_c)
A
BA
C
B
C
If the white stopper is stuck,
push up from the bottom of
the leg divider with a
screwdriver to pop it out.
Optional Part
0-2 years
Rayne Highchair
Assembly Instructions
8
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558