Mocka Rayne - Page 9

13
14
WARNING: Never leave the child unattended! Please keep
accessories away from babies and children to avoid harms from
eating by mistake.
Use a screwdriver to loosen the screws underneath the seat (fig_a),
then take out the T bar (fig_b) and put the white stopper into the leg
divider (fig_c).
Turn over the cushion and loosen the screws at two sides of the leg
divider, then take off the leg divider (fig_a), press the small white insert
block into the seat (fig_b) and tighten the screws on both sides (fig_c).
A
BA
C
B
C
Optional Part
3+ years
Optional Part
2-3 years
Rayne Highchair
Assembly Instructions
9
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558