@hello_mockingbird
12
Washing the stroller seat
Locate the plastic stays on the back and
bottom of the stroller seat. Thread these
through the stroller seat to remove the
harness. The canopy and child bar should
be removed as well.
Unzip the footrest and undo the velcro
attachments on the sides and bottom of
the seat. Pull the seat fabric up and over
the recline latch to fully remove the seat
fabric from the seat frame.
Flip the fabric on the headrest over to
expose the velcro opening. Undo the velcro
and pull out the backrest board. Locate the
velcro opening on the bottom of the seat,
undo and pull out the seat board. You are
now ready to machine wash your stroller
seat. Wash in cold water and air dry only.
Remove the harness
straps
Remove the seat fabric Remove the seat boards
Pro Tip
For smaller messes, the stroller seat can be spot cleaned
with a damp cloth.
Back of the
stroller seat
Bottom of the
stroller seat
To Next Page
Loading...
