Mockingbird Single Stroller - Step 2: Attach the Wheels

@hello_mockingbird
3
Push the front wheel post into the wheel housing until it
“CLICKS” into a fully locked position. Pull on the wheel to
confirm it is attached. To remove, press the metal button
located on the back of the wheel housing and push inward.
Push the rear wheel post into the wheel housing. Pull on the
wheel to confirm it is attached. To remove, lift the white levers
located on the back of the wheel housing and pull the wheel
outward.
Attaching the front wheels Attaching the rear wheels
Attach the wheels
2
Before attaching the front wheels, make sure the stroller is
in a fully open position.