32 33
Filter
ARGON8X has 4 state variable 2-pole resonant filters to choose from: Standard, Standard
Notch, Classic and Classic Notch (all capable of morphing from low pass, through band pass /
notch, to high pass).
• Cutoff: This parameter controls the low-pass filter cutoff frequency. This affects the
cutoff frequency of the filter, from 0Hz up to 22kHz.
• Reso: This parameter controls the amount of resonance of the filter.
• Morph: This encoder allows control of the shape of the filter: note that the filter is low-
pass by default.
- At its minimum value you have a low pass filter;
- We move through a sort of low-shelving;
- At its midpoint we have a band-pass filter or notch filter;
- At its maximum value a high-pass filter.
TIP: With this feature at lower settings you can dampen the low frequencies while
maintaining a rich high-end texture.
• Type: Holding the ‘Patch/Seq’ button and turning the Cutoff encoder selects the current
type of the filter. The filter types available are:
- Standard
- Standard Notch
- Classic
- Classic Notch
To Next Page
Loading...
