EasyManua.ls Logo

Modena WF 620 - Using the Drum Cleaning Program

Modena WF 620
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 31
featured with Drum Cleaning
programme, use Cottons-90
programme and select Additional
Water or Extra Rinse auxiliary
functions as well.
- Run the programme without any laundry in the machine. Before starting the programme, put
max. 100 g of powder anti-limescale into the main wash detergent compartment). If the anti-
limescale is in tablet form, put only one tablet into compartment main wash.
- Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.
Note: Repeat Drum Cleaning process in every 2 months. After every washing make sure that no
foreign substance is left in the drum.
If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.
Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum
surface by using cleaning agents for stainless steel. Never use steel wool or wire wool.
Warning : Never use sponge or scrub materials. These will damage the painted and plastic
surfaces.

Related product manuals