Modena WF 620 - User Manual

Questions and Answers

G
Gary TrevinoAug 20, 2025
Why is my Modena WF 620 Washer vibrating and making noise?
- L
  Lisa YoungAug 20, 2025
  If your Modena Washer is vibrating and making eject noises, several factors could be the cause. First, ensure the machine is level by adjusting the feet. A hard substance might have entered the pump filter, so cleaning the pump filter is recommended. Also, check that the transportation safety bolts have been removed. An unbalanced load, either too little or too much laundry, can cause this issue; adjust the laundry quantity accordingly. Finally, ensure the machine isn't leaning on any rigid items.
A
alexandercynthiaAug 21, 2025
How to stop foam overflowing from the detergent drawer of my Modena WF 620 Washer?
- K
  Kristin LopezAug 21, 2025
  If foam is overflowing from the detergent drawer of your Modena Washer, it's likely due to using too much detergent. To resolve this, mix 1 tablespoonful of softener with ½ liter of water and pour it into the main wash compartment of the detergent drawer.
J
Joanna LambAug 25, 2025
What to do if laundry remains wet after the program ends in my Modena WF 620?
- K
  Kevin ClayAug 25, 2025
  If your laundry is still wet after the wash cycle in your Modena Washer, it might be because excessive foam occurred, activating the automatic foam absorption system due to using too much detergent. Make sure to use the recommended amount of detergent in future washes.
J
Jermaine ScottAug 26, 2025
Why can't I start or select a program on my Modena WF 620 Washer?
- C
  Corey CastroAug 26, 2025
  If the program on your Modena Washer cannot be started or selected, the machine may have switched to self-protection mode due to an infrastructure problem, such as line voltage or water pressure issues. You can reset your machine by pressing the 'Start/Pause' button for 3 seconds.
M
Melissa LoveAug 27, 2025
How to fix abnormal water supply in my Modena Washer?
- M
  Mr. Richard SilvaAug 28, 2025
  To solve the problem with water supply, check if the water supply is active, if the faucet is in good condition and check the water pressure.
S
staceypetersAug 30, 2025
What to do if water draining is not normal in my Modena Washer?
- J
  Joanna WatsonAug 30, 2025
  To solve the problem with water draining, check if the drain hose is well connected and clean the drain filter.
D
derekthompsonAug 31, 2025
Why did my Modena Washer stop soon after the program started?
- M
  Mark BlackburnSep 1, 2025
  If your Modena Washer stopped shortly after starting a program, it might have stopped temporarily due to low voltage. The machine will resume running when the voltage restores to the normal level.
M
Mark MorrisSep 3, 2025
Why isn't the program time counting down on my Modena WF 620 Washer?
- R
  Robert JonesSep 3, 2025
  If the program time isn't counting down on your Modena Washer (for models with a display), the timer may pause during water intake until there's enough water to ensure good washing. It might also stop during the heating step until the selected temperature is reached, or during the spinning step, in which case the laundry should be rearranged and re-spun.
R
Richard MillerSep 4, 2025
How to fix low water level in my Modena Washer?
- S
  Steven WalkerSep 4, 2025
  To solve the problem with low water level, check if the drain hose is too low, having a problem, or defective.
R
Richard ColeSep 7, 2025
What to do if the door lock is not perfect in my Modena WF 620 Washer?
- P
  Pamela BowersSep 7, 2025
  Please make sure that the door of your Modena Washer is perfectly closed.