Modena WF 620 - Page 37

English 34
If there is error code on digital display, below is the meaning:
Problem Code
Description
Solution
The door lock is not perfect
Please make sure that the door is perfectly
closed. If there is still problem, please
contact the service center.
Water supply is not normal
Check if water supply is active.
Check is the faucet is good.
Check the water pressure.
Water draining is not normal
Check if the drain hose is connected well.
Clean the drain filter
Water level is low
Check if the drain hose is too low, having
problem, or defective.
Unstable voltage
The program will be automatically restarted
after the voltage is stable.
Abnormal button
Check the button.
Contact service center
Abnormal circuit function
Check the circuit connection.
Contact service center.
The temperature is too high
Restart the unit.
Abnormal water level sensor
Contact service center.
Abnormal motor
Contact service center.
Abnormal temperature sensor
Contact service center.
Water level is high
Check the drainage pump.
Alarm
Check the position of the load, it should be
balance.