(11) Your fan is reversible for summer and winter
operation. The reverse switch is located on the side
of the fan switch housing. The LEFT position is for
summer and the RIGHT position is for winter.
(14) The rotor and motor of your fan have been dynamically balanced at the
factory. In addition, the blades have been matched to the nearest gram to ensure
a well balanced ceiling fan. Furthermore, a blade balancing kit has been included
with your fan. Please refer to the instructions packaged with the balancing kit
should your fan require additional balancing.
(13) Install control as described in the control installation instructions.
(12) To install the optional light kit, begin
by identifying all parts. Then follow steps
(a) through (f) below.
(a) Using screws
from hardware
packet, attach ring
to fan.
(b) Using screws
from hardware
packet, attach
socket to fan. Then
join wire connectors.
(e) Identify three
channels in glass
globe to align with
fittings on ring.
(c) Screw in lamp.
Touch ceramic
portion of lamp
only, not glass.
(d) Be sure light
switch is in the on
position.
(f) Aligning channels
and fittings, rotate
glass globe in the
clockwise direction
until securely in
place.
To Next Page
Loading...