Modern Forms Aviator Flush - Package Contents

FH-W1811
Aviator Flush Instructions8
** denotes nish code of fan *** denotes blade sweep of fan
Package Contents
6. Bottom Cap (Aluminum)
7. Control Receiver W/
Hardware
RPL-F1811-54-REC
8. Wall Control W/Hardware
F-WCBT-WT
• 3/16” x .375” Flat head
screws (5 pcs) -Blade
Collector Ring
• ø 4x9mm Flat head screws
(10 pcs) - Blade Screws
• 1/4” x 16mm Pan head
Philips screws with washer
(7 pcs)
• ø 5x14x1mm Flat washers (2
pcs) - Hanger Plate
• #8-32x38mm Pan Head
Philips Screw (2 pcs) -
Hanger Plate
• ø 5.2x8.4x1mm Spring
washers (2 pcs) - OPTIONAL
for direct wood mount -
Hanger Plate
Hardware Bag
RPL-AVIATORFH-PART
1. Blade Set of 3
RPL-F1811-54-BD-**
2. Blade Collector Ring
3. Hanger Plate
RPL-F1811-HANGER-**
4. Hanger Gasket
5. Motor Assembly
Before discarding packaging materials be certain all parts have been removed.
Place the parts from the hardware bag into a small container to keep them from being lost.
• ø 4.4x9.4x1mm Star washers
(2 pcs) OPTIONAL for direct
wood mount - Hanger Plate
• #10x38mm Pan head Philips
wood screws (2 pcs) -
OPTIONAL for direct wood
mount -Hanger Plate
• ø 5.2x8.4x1mm Spring
washer (1 pc) - Safety Cable
• ø 6.5x19x2mm Flat washer (1
pc) - Safety Cable
• #10x76mm Pan head Philips
wood screw (1 pc) - Safety
Cable