Need help?Do you have a question about the Modern Forms Aviator 5 and is the answer not in the manual?
General| Brand | Modern Forms |
|---|---|
| Model | Aviator 5 |
| Category | Fan |
| Language | English |
Ensure power is off, follow codes, use a licensed electrician for wiring and installation.
Maintain minimum clearances from floor and walls; ensure secure mounting structure.
Use only approved parts; do not install damaged parts; avoid power tools and bending blade arms.
Details all parts included in the package, such as mounting bracket, fan blades, motor housing, and hardware.
Instructions for attaching the mounting bracket to the outlet box, ensuring secure wiring.
Steps for placing and securing fan blades to the motor assembly using screws and washers.
Steps to remove hanger ball screw, loosen clevis pin and cotter pin for downrod assembly.
Install coupling cover, canopy ring, and downrod assembly into motor housing.
Connect fan wires to receiver and outlet box wires to receiver as per diagram.
Detailed steps for connecting wall control wires to the outlet box and fan wires.
Secure wall control, attach mounting plate, and fasten wall plate.
Wiring diagram for installing multiple wall controls and pairing with the fan receiver.
Instructions on how to pair the fan receiver with the remote or wall control within 3 minutes of power.
Reset Wi-Fi connection by pressing specific buttons until the receiver beeps.
Factory reset for remote/wall controls and receiver to clear connections.
Connect to Wi-Fi using SSID and password; name your fan and upload a picture.
To Next Page