Modern Forms Aviator - Page 8

FR-W1811
Aviator Instructions8
** denotes nish code of fan *** denotes blade sweep of fan
Package Contents
5. Coupling Cover
6. Motor Assembly
7. Lower Cover Bottom Cap
RPL-F1811-***-CA-**
8. Control Receiver
w/Hardware
F-R3-1811-054
9. Wall Control
F-WCBT-WT
• 4x9 at head customed
philips screws (10)
• 1/4”-20 threads x16mm+S
Pan Head Phillip Screws (7)
• 6.5x19x2mm Flat Washer (1)
• 3/16”(5.2x8.4x1.0mm)
Spring Washer (1)
Hardware Bag
RPL-AVIATOR-PARTS
1. Blade Set of 3
RPL-F1811-***-BD-**
2. Hanger Assembly
Mounting Bracket
Downrod Assembly
RPL-HGR-ASM-**
3. Blade Collector Ring
4. Canopy w/Canopy Ring
RPL-CAN-CYL-**
Before discarding packaging materials be certain all parts have been removed.
Place the parts from the hardware bag into a small container to keep them from being lost.
• #10x76mm Pan Head Phillip
Wood Screws (1)
• #10x38mm Pan Head
Phillip Screws (2)
• Ø5*14*1mm Flat Washer (2)
• 3/16” Star Washer (2)