3920’ Predator
Cutting Component Inspection
Inspect blade pan and blade assembly for the following:
Inspect the Blades daily for abnormal wear. REPLACE BOTH BLADES on that carrier IMMEDIATELY if
either blade has:
• Become bent or deformed from it’s original shape or
$Q\FUDFNVDUHYLVLEOHRU
• Deep gouges in the blade’s surface are persent, or
• Gouges or chipped areas in the cutting edge are larger than 1/2”, or
• The material on the leading edge has been worn away by more than 1/2”
Failure to replace abnormally worn blades may lead to catastrophic failure of the blades and ejec-
WLRQRIWKHEURNHQSDUWZLWKWUHPHQGRXVIRUFHZKLFKPD\FDXVHVHULRXVERGLO\LQMXU\RUGHDWK
OPS-U-0031
DANGER
OPERATION
To Next Page
Loading...