Modern Predator - Page 40

40 20’ Predator
Rotary Cutter PRE-OPERATION Inspection
&XWWHU,'BBBBBBBBBBBBBBBB0DNHBBBBBBBBBBBBBBBBBBBB
Date: ________________ Shift ____________________
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped
and the tractor is in park with the parking brake engaged. Make sure the cutter is resting on
the ground or securely blocked up and all hydraulic pressure has been relieved.
The Operator’s Manual is in the canister on the cutter
All safety decals are in place and legible
The tongue/hitch connection bolts & pins are tight
7KHUHDUHQRFUDFNVLQWRQJXHRUKLWFK
The tow chain is secured to the tractor & cutter
The hydraulic cylinders pins are tight
7KHUHDUHQROHDNLQJRUGDPDJHGKRVHV
7KHFXWWHUGHFNLVFOHDURIFXWJUDVVDQGGHEULV
&KDLQJXDUGVGHÁHFWRUVDUHLQSODFHLQJRRGFRQGLWLRQ
Driveline/gearbox shields are in good condition
Driveline clutches are in good condition; not frozen
Driveline telescoping members & U-joints are lubricated
'ULYHOLQH\RNHVDUHVHFXUHO\DWWDFKHGWR372FXWWHU
Gearbox mounting bolts are tight
Gearbox oil is at the proper level
Blade carrier retaining nut is tight
%ODGHVDUHQRWFKLSSHGFUDFNHGRUEHQW
Blade bolts are tight
Wheel lug nuts are tight
7UDQVSRUWORFNVDUHLQJRRGFRQGLWLRQ
Operator’s Signature:
DO NOT OPERATE an UNSAFE TRACTOR or Cutter
Item
Condition at
Start of Shift
6SHFLÀF&RPPHQWV
if not O.K.
OPERATION