Modern Predator - Page 41

4120’ Predator
Rotary Cutter PRE-OPERATION Inspection
&XWWHU,'BBBBBBBBBBBBBBBB0DNHBBBBBBBBBBBBBBBBBBBB
Date: ________________ Shift ____________________
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped
and the tractor is in park with the parking brake engaged. Make sure the cutter is resting on
the ground or securely blocked up and all hydraulic pressure has been relieved.
7KHÁDVKLQJOLJKWVIXQFWLRQSURSHUO\
The SMV Sign is clean and visible
The tires are in good condition with proper pressure
The wheel lug bolts are tight
7KHWUDFWRUEUDNHVDUHLQJRRGFRQGLWLRQ
7KHVWHHULQJOLQNDJHLVLQJRRGFRQGLWLRQ
7KHUHDUHQRYLVLEOHRLOOHDNV
The hydraulic controls function properly
The ROPS or ROBS Cab is in good condition
The seatbelt is in place and in good condition
The 3-point hitch is in good condition
The drawbar pins are securely in place
The PTO master shield is in place
The engine oil level is full
7KHEUDNHÁXLGOHYHOLVIXOO
7KHSRZHUVWHHULQJÁXLGOHYHOLVIXOO
7KHIXHOOHYHOLVDGHTXDWH
7KHHQJLQHFRRODQWÁXLGOHYHOLVIXOO
The radiator is free of debris
7KHDLUÀOWHULVLQJRRGFRQGLWLRQ
Operator’s Signature:
DO NOT OPERATE an UNSAFE TRACTOR or Cutter
Item
Condition at
Start of Shift
6SHFLÀF&RPPHQWV
if not O.K.
OPERATION