MOEBE Frame User Manual (English)

To Next Page

Assembly Instructions / Frame

Strandlodsvej 42a, 1 DK-2300 Cph S

(+45) 7174 7496, moebe.dk

Frame

The Frame consists of two pieces of acrylic glass, four lists made of either

untreated wood or aluminium, and a rubber band. The rubber band not

only holds the frame together but also serves to hang the frame on your

wall.

Our frames t a wide range of motifs; from pressed owers to thin pieces

of paper. Nonetheless, it can happen that the acrylic glass is aected by

variations in temperature and humidity, causing your motif

to slide or move in the frame.

If this happens you can either try to ip the two sheets of acrylic glass

so outside becomes inside or you can x your motif either using an acid-

free glue or a piece of tape. You can also make your motif thicker by eg.

placing an additional piece of paper behind it.

Need help?

Do you have a question about the MOEBE Frame and is the answer not in the manual?

MOEBE Frame Specifications

General

Pull a corner of the frame apart to remove the rubberband and open it.

Place artwork between glasses, then attach three lists to the glass.

Pull the rubber band around the assembled lists to secure the frame.

Insert the final list to complete the frame assembly process.