Moeller DF6-340-11K - Page 180

01/02 AWB8230-1413GB
Standard form for user defined
parameter settings
177
PNU Function Units WE Page Setpoint
d001 Output frequency display – – 104 – – –
d002 Output current display – – 104 – – –
d003 Direction of rotation display – – 104 – – –
d004 PID feedback display – – 104 – – –
d005 Digital inputs 1 to 5 status – – 104 – – –
d006 Status of relay outputs K11 to K34 – – 104 – – –
d007 Scaled output frequency – – 104 – – –
d013 Output voltage – – 104 – – –
d014 Electrical input power – – 104 – – –
d016 Running time – – 104 – – –
d017 Mains On time – – 104 – – –
d080 Entire count of malfunctions which occurred – – 104 – – –
d081 First fault (last fault which occurred) – – 104 – – –
d082 Second fault – – 104 – – –
d083 Third fault – – 104 – – –
d084 Fourth fault – – 104 – – –
d085 Fifth fault – – 104 – – –
d086 Sixth fault – – 104 – – –
d090 Warning – – 104 – – –
PNU Function Units WE Page Setpoint
F001 Frequency setpoint value [Hz] 0.0 105
F002 Acceleration time 1 [s] 30.0 105
F202 Acceleration time 1 (second parameter set) [s] 30.0 105
F003 Deceleration time 1 [s] 30.0 106
F203 Deceleration time 1 (second parameter set) [s] 30.0 106
F004 Direction of rotation
• 00: Clockwise operation
• 01: Anticlockwise rotation
–00
(clockwise)
106
PNU Function Units WE Page Setpoint
H003 Motor rating: 0.2 to 160 kW [kW] Depending
on inverter
model
H203 Motor rating: 0.2 to 160 kW (second parameter set) [kW]
H004 Number of motor poles: 2/4/6/8 – 4
H204 Number of motor poles (second parameter set) – 4
H006 Motor stabilization constant – 100
H206 Motor stabilization constant (second parameter set) – 100
efesotomasyon.com - Klockner Moeller - inverter