Moen 4925 series User Manual

DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up type waste assembly
OPERATION
• Lever style handles with hot and cold color indicators
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products
made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
ANSI A117.1 and all applicable requirements referenced therein.
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Two-Handle Lavatory Faucet
Models: 4925 series
With 50/50 Waste Assembly
Bulk Pack (12 per Carton)
Model: 64925 series
NOTE: DESIGNED TO BE INSTALLED THROUGH
3 - 1” MIN. DIA. HOLES 2” ON CENTER
2-9/32"
(58mm)
2"
(50mm)
2"
(50mm)
3-11/32"
(84mm)
6-11/64"
(156mm)
1-13/64"
(30mm)
3-3/16"
(80mm)
4-21/64"
(110mm)
ESCUTCHEON DIA.
6-1/4" x 2-19/32"
(159mm x 66 mm)
MAX. DECK THICKNESS
3/4" (19mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/11

Moen 4925 series Specifications

General

Brand	Moen
Model	4925 series
Category	Plumbing Product
Language	English