Moen Eva T6420 series User Manual

DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, and
all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
EVA™
Two Handle Widespread
Lavatory Faucet
Models: T6420 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
4“
(102mm)
4-7/8“
(124mm)
4-1/8“
(105mm)
2“
(51mm)
Lift
Rod
2-1/4“
(57mm)
3“
(76mm)
3-1/2“
(89mm)
8
“
(204mm)
6“
(153mm)
QUICK CONNECT
HOSE ASSEMBLY
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/11

Moen Eva T6420 series Specifications

General

Collection	Eva
Model Number	T6420
Finish	Chrome
Handle Type	Lever
Flow Rate	1.2 GPM
Mounting Type	Deck Mount
Valve Type	Ceramic Disc
ADA Compliant	Yes
Warranty	Limited Lifetime
Series	Eva
Product Type	Faucet

Summary

Product Identification and Specifications

EVA Two Handle Widespread Lavatory Faucet

Identifies the faucet model and series, including valve numbers and installation notes.

Description and Operation

Details metal construction, IPS connections, lever handle operation, and handle rotation angle.

Flow and Cartridge Specifications

Covers flow rate limits and the 1224 cartridge design with nonmetallic materials.

Standards and Compliance

Lists certifications like WaterSense, CSA, ASME, and compliance with lead content and drinking water acts.

ADA Compliance and Warranty Information

Specifies ADA compliance for lever handles and details the lifetime limited warranty.

Critical Dimensions

Provides key measurements for installation, noting that the diagram is not to scale.