Moen Extensa 7560C User Manual

FAUCET DESCRIPTION
• Hydrolock® quick connect installation
• Flush button with raised stream and spray indicators
• Metal construction with 10 finishes
• Pullout spray with 59" fiber hose
• 1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
OPERATION
• Lever style handle
• Temperature controlled by 180˚ arc of handle travel
• Spout receptor rotation is 145˚
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or
retracted position
FLOW
• Flow is limited to 2.2 gpm (8.3 L/min) at 60 psi
CARTRIDGE
• 1225 cartridge design
• Engineered polymers, non-ferrous and stainless
steel materials
STANDARDS
• Designed and manufactured to comply with the
requirements of: CSA B-125, ASME A112.18.1M, IAPMO PS
49-92, NSF 61 Section 9, California Proposition 65, ANSI
A117.1, ADA
• The backflow protection system in this device consists of
two independently operating check valves, a primary and
a secondary which prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
For 8"(203mm)
Mounting
2-1/2"(64mm)
Max. Deck Thickness
Single Mount Esc.
2-1/8"(54mm)
Max. Deck Thickness
Deck Esc.
1-1/4"(32mm) Dia.
Minimum
Mounting Hole
3/8" (10mm)
Supply Tubes
1/2" IPS
Connection
16"
(406mm)
8"
(203mm)
10"
(254mm)
Cold
Hot
Flexible
Metal Hose
Counter Weight
Deck Escutcheon
10-7/16" x 2-7/16" wide
(265mm x 62mm)
3 Hole, 4" o.c. Installation
Single Hole Installation
1/4" (6mm)
Threaded Dia.
18 NPSM
11-1/8"
(284mm)
10-3/8"
(264mm)
2-3/8" (60mm)
Escutcheon Dia.
ADA
Rev. 12/06
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/4” (32mm) MIN. DIA.
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Extensa™
Single Control Kitchen Faucet
w/Pullout Spray
Models: 7560C, 7560S, 7560W, 7560V, 7560BL,
7560SL, 7560SLBL
87560W, 87560SL
DISCONTINUED MODELS: 7560, 7560CS,
7560CBL, 87560C, 87560S, 87560SLBL, 87560CS,
87560CBL, 87560

Moen Extensa 7560C Specifications

General

Brand	Moen
Model	Extensa 7560C
Category	Plumbing Product
Language	English

Summary

Faucet Specifications

Faucet Description and Operation

Details features like quick connect, metal construction, pullout spray, and lever handle operation with 180-degree arc.

Flow and Cartridge Details

Specifies flow rate at 2.2 gpm and mentions the 1225 cartridge design using polymer and metal materials.

Standards and Warranty

Lists compliance with CSA, ASME, NSF standards and outlines lifetime limited warranty for consumers.

Product Model Information

Extensa Faucet Models

Lists current and discontinued model numbers for the Extensa Single Control Kitchen Faucet with Pullout Spray.

Installation Note

Specifies that the faucet is designed for 1 or 3 hole installation with a minimum 1-1/4 inch diameter.

Critical Dimensions

Faucet Dimensions Diagram

Provides a detailed diagram with measurements for faucet height, reach, deck thickness, and mounting hole configurations.