Need help?Do you have a question about the Moen Gec8 JR and is the answer not in the manual?
General| Brand | Moen |
|---|---|
| Model | Gec8 JR |
| Category | Music Pedal |
| Language | English |
Key features of the GEC8 JR include its compact size, instant recall, true bypass design, multiple loops, dedicated footswitches, and preset storage.
The 'T' switch mutes the output and connects the TUNER jack to the INPUT jack when engaged.
Switches A/B/C/D recall presets in RECALL mode and control loop bypass/engagement in PROGRAM mode.
The BANK switch changes banks (1-6) in RECALL mode and activates loop groups for programming in PROGRAM mode.
Indicators show the status of FS1/FS2 footswitches: on when open, off when latched.
Numerical display shows the active bank; loop indicators show when a loop is engaged.
INPUT jack connects to guitar; TUNER jack connects to a tuner.
Loop pairs connect SEND (S*) to pedal input and RETURN (R*) from pedal output.
OUTPUT jack carries signal via loops 1-7; DC Jack requires 9V negative center power supply.
Loop 8 is separate, with IN8/OUT8 and S8/R8. S8 and OUT8 also act as footswitches for amplifier channel control.
Jacks for external footswitches to control amplifier channels; FS1 supports stereo cable connection.
Illustrates the signal flow from INPUT through loops 1-7 to OUTPUT, and the separate path for LOOP8.
Describes how to recall presets A/B/C/D and change banks, noting memory retention upon power off.
Explains entering PGM mode by holding BANK, controlling loops with A-D switches, and managing FS1/FS2.
Lists dimensions, weight, power supply requirements, current drain, and maximum input voltage.
Diagram showing 8 pedals and 2 AMP channel switching setup.
Diagram illustrating 7 pedals and 3 AMP channel switching setup.
To Next Page