Need help?Do you have a question about the Mohawk MS-500 and is the answer not in the manual?
Details on connecting the amplifier's power supply and ground.
Sets the lower cut-off frequency, variable from 15Hz to 55Hz.
Connection for the remote control to adjust subwoofer levels.
Adjusts the bass boost from 0dB to 12dB for enhanced low frequencies.
Adjusts subwoofer frequency response from 40Hz to 150Hz.
Describes the function of the Power On LED and Protect LED.
Explains how to connect low-level and high-level audio inputs.
Instructions for connecting speaker wires to the amplifier's terminals.
Guidance on setting the amplifier's level control for optimal sound.
To Next Page
General