Mohu sail - Box Contents and Setup; Included Components; RF Splitter Installation Guidance

E
J
L
Mounting Tube
Tube Mounting Bracket
x4 - Screws
x4 - Outdoor Screws
x2 - Wingnuts
x1 - U-Bolt
x2 - Carriage Bolts
x2 - Flange Nuts
x4 - Washers
Two and Four Hole
Antenna Mounting Brackets
with Teeth
(Not Provided)
Para español, visite gomohu.com/setup
CONNECT RF SPLITTER HERE
DO NOT CONNECT RF SPLITTER HERE
DO NOT connect RF splitter to the coaxial cable
attached to the antenna.
.
NOTE: the amplifier must be connected
between the antenna and RF splitter.
The RF splitter (not provided) should ONLY be connected
to the coaxial cable attached to the power injector.
Coaxial
Cable
Power Injector
RF Splitter
IF USING AN RF SPLITTER
(NOT PROVIDED),
CORRECT INSTALLATION IS
VERY IMPORTANT. IMPROPER
INSTALLATION MAY CAUSE
DAMAGE TO THE TV.
BOX INCLUDES
Sail
TM
Antenna
30 ft. Coaxial Cable
USB Power Adapter*
Power Injector
Antenna Mounting Hardware
RF SPLITTER (NOT PROVIDED) INSTALLATION
*Actual USB power adapter may dier in appearance.