Need help?Do you have a question about the Molecular Devices Digidata 1550B and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Analog Input Channels | 16 |
| Analog Output Channels | 4 |
| Digital I/O Channels | 16 |
| Resolution | 16-bit |
| Input Voltage Range | ±10 V |
| Output Voltage Range | ±10 V |
| Connectivity/Interface | USB 2.0 |
| Software Compatibility | pCLAMP |
| Compatibility | Windows |
Explains safety alert symbols found on the instrument and their meanings.
Lists all items included in the Digidata 1550B package.
Specifies the minimum hardware requirements for the computer.
Discusses software options and programming interfaces for the digitizer.
Explains how the HumSilencer Adaptive Noise Cancellation works.
Provides steps to remove previous versions of software and drivers.
Guides through the installation of AxoScope or pCLAMP software.
Details the process of installing the USB security key for pCLAMP.
Outlines the physical installation steps for the digitizer hardware.
Explains how to configure the software to recognize the digitizer.
Details the front panel's rocker switch, indicator lights, and connectors.
Explains the ANC system integrated into analog input channels for noise reduction.
Describes the rear panel connectors: BNCs, USB, 25-pin, and AC power input.
Outlines procedures to verify digitizer signals and software configuration.
Provides recommendations to avoid ground-loops and reduce noise in the system.
Step-by-step guide on how to safely replace the instrument's fuses.
Guides users through simplifying the configuration to identify issues.
Addresses problems related to the power and ready indicator lights.
Provides steps to check and resolve issues with analog and digital outputs.
Offers solutions for issues encountered with analog and digital inputs.
Addresses unexpected behavior like lock-ups or general non-responsiveness.
Helps diagnose and resolve problems related to data transfer performance.
Guides users on how to contact support and what information to provide.
Details weight, dimensions, power, and environmental operating conditions.
Lists specifications for the 8 single-ended analog input channels.
Lists specifications for the 8 analog output channels.
Details input types and trigger sensitivities for digital inputs.
Lists specifications for digital outputs, including bit count and current.
Details specifications for the 4 telegraph input channels.
Lists specifications for the HumSilencer Adaptive Noise Cancellation module.
Details voltage input, fuse type, dimensions, and rating for AC power.
States compliance with Canadian ICES-001 standard for ISM devices.
Classifies the equipment as scientific laboratory use for internal functioning.
Provides information on FCC compliance and potential interference issues.
To Next Page
