Molekule Air Pro - Molekule Air Pro Setup Guide; Core Removal; PECO-Filter Installation; Aligning and Securing Core

Setting up
02
Push down on center core,
turn counterclockwise
and release. Core will rise
on its own. Lift it off.
Remove PECO-Filter
from plastic wrapper
and place back in.
Align red line inside shell
with red line on core so it
falls into place.
Push down and turn
clockwise until it
locks into place.
Unwind cord and plug
into power outlet.
Download the Molekule
app to complete setup
and enable control from
your phone.
Place away from walls for optimal airflow.