7
Molift Raiser Pro / www.etac.com
Transport and storage
Molift Raiser Pro can be stored and transported under temperatures
between -25 - 70 °C and relative humidity between 15 - 93 %
Don`t use the Molift Raiser Pro for transportation of goods.
Cleaning and disinfection
Clean on a regular basis. Clean surfaces with a damp cloth using
an apPropriate pH-neutral detergent. Do not use solvents or
strong liquids, this may damage surfaces on the Molift Raiser Pro.
For disinfection when needed; use isoPropyl alcohol or similar.
Avoid abrasive cleaning Products. Remove hair and pile from the
wheels, verify that the wheels rotates freely and brakes functions
Properly. Make sure not to damage or remove labels when
cleaning.
Reconditioning
Follow cleaning and assembly Procedure. Separate reconditioning
document is available at Etac.com.
Spare parts
A list of spare parts is available at Etac.com.
Recycling
Molift Raiser Pro can be disposed of as metal and plastic waste.
Recycling instructions is available at Etac.com
3
4
3. Release the brake with one
foot.Pull the Molift Raiser
backwards and then steer
it toward the new seating
position. Make sure that any
wheels are locked in the new
seating. The transfer is best
done with the user faced in
the direction of travel.
4. Lock both wheels. Place a foot
on the edge of the footplate
before the user sits down. Counter
balance while the user sits down.
Maintain eye contact with the user
during the entire transfer Process.
The assistant has to be able to handle the weight of the user.
User / Assistant
Make sure the users weight is close to the center of the base
plate.
ENSVNODAFIDENLFRITES
The carer must always counter balance the weight of the
user when she/he stands up or sits down.
Brake unlocked
Brake locked
Accessories
Molift Raiser Belt
Molift Raiser Strap
Molift Raiser Strap +
Molift Raiser Soft Handels
To Previous Page
Loading...
