1. SETTING THE TIME
Pull the winding crown out into position III.
When doing this make sure the chronograph second hand remains
in the 0 position.
Turn the winding crown counterclockwise to set the current time.
Push the winding crown back into its original position.
The small second hand will start moving.
2. SETTING THE CURRENT DATE
Pull the winding crown out into position II.
Turn the winding crown clockwise to set the current date. Push the
winding crown back into its original position.
The EVOLUTION 3.0 wrist watches are battery powered
chronograph watches with a quartz movement.
WARNING! DO NOT SET THE DATE BETWEEN 21.00 and 01.00.
DESCRIPTION, DISPLAYS AND FUNCTIONS
BEFORE YOU BEGIN USING THE WATCH, PLEASE READ THIS
IMPORTANT INFORMATION
To Next Page
Loading...