Need help?Do you have a question about the Moma Bike and is the answer not in the manual?
General installation steps for mountain and city bikes, including initial component checks.
Detailed guide for installing the front wheel on mountain bikes using a quick release system.
Steps for fitting the front wheel on city bikes, including V-Brake and handlebar adjustments.
How to adjust the handlebar's rotation and stem tightness for city bikes.
How to correctly screw in the left and right pedals using hands and a wrench.
Procedure for installing and adjusting the saddle height using the quick release system.
Steps to install a bike basket using screws, ensuring no interference with the handlebar.
Folding bikes are fully assembled; adjust handlebar and seat post.
Instructions for unfolding a folding bike, securing its hinge, and adjusting the headset.
Guidance on installing pedals for folding bikes, emphasizing correct side and tightening.
How to adjust the saddle height and ensure the seat post is correctly positioned in the frame.
Detailed guide on adjusting saddle height and inclination for optimal rider comfort.
Instructions for adjusting handlebar inclination and stem tightness for comfortable steering.
Notes that mountain bike handlebars are not height-adjustable; stem or extension changes are needed.
How to adjust the handlebar height on city bikes using a regulating screw and alignment.
Adjusting folding bike handlebar height via quick release and aligning the headset.
Guidance on adjusting the inclination of brake and shift controls for better accessibility.
Ensuring crankset screws are tight and notes on crank arm removal using a specific tool.
Recommendations for using gears correctly, avoiding specific chain/sprocket combinations, and smooth pedaling.
Instructions for adjusting rear derailleur limit screws and cable tension for smooth gear changes.
How to align front derailleur guides and adjust limit screws for proper chain positioning.
Guidance on aligning V-brake pads with the rim and when to replace worn pads.
Steps to adjust V-brake pad distance from the rim by tightening the cable tensioner.
Instructions for disc brake pad replacement, disc cleaning, and caliper alignment.
How to correctly install and secure wheels using the quick release system, checking for tightness.
Procedure for removing and assembling wheels secured with axle nuts, using specific wrenches.
Steps for removing and installing tires and inner tubes, including inflation and checking rim fit.
Recommendations for optimal tire pressure based on bike type and riding conditions, including running-in phase.
Regular checks for headset, brakes, saddle, tires, pedals, and general bike cleaning advice.
To Next Page
General