Do you have a question about the Monacor ICM-20H and is the answer not in the manual?
Details components and connections of the base station unit.
Details components and connections of the calling station unit.
Instructions for attaching the calling station using adhesive Velcro rings.
Instructions for mounting the calling station via a thin partition using screws.
| Frequency Response | 100 Hz - 16 kHz |
|---|---|
| Transmission method | Wired |
| Polar pattern | Cardioid |
| Impedance | 200 Ω |
| Gooseneck length | 300 mm |
| Weight | 150 g |
| Operating Voltage | 12 V DC |
| Power Supply | DC 12V |
| Connection | XLR |
Loading...